Skip to main content

Activating Direct-To the Hold:

NOTICE

Deleting the hold from an Active Flight Plan waypoint will remove the holding pattern from the flight plan, provide guidance to the active leg, and resume automatic waypoint sequencing.

  1. After entering a hold into the flight plan touch the waypoint identifier indicating the hold point.
  2. Touch the Activate Hold Button.
  3. A confirmation window will open prompting the pilot, "Activate Leg?"
  4. Touch the OK Button to confirm the activation. The FMS will immediately begin navigation guidance direct to the holding point waypoint.

    Or:

    Touch the Cancel Button to return to the 'Hold Options' window.

190-03123-01 Rev B
July 2026
© 2026 Garmin Ltd.