Charging the Handheld Device

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer.

You should fully charge the battery before you use the device for the first time or whenever the battery is low (Checking the Battery Level of the Handheld Device). It is normal for the battery to discharge in approximately 1 year when the device is not in use. Charging a fully depleted battery takes about 2 hours.

NOTE: The device is not functional while charging. The device will not charge when it is outside the charging temperature range (Delta SE Handheld Device Specifications).
  1. Lift the weather cap Callout number 1.

    Back view of the handheld device with callouts
  2. Plug the small end of the power cable into the USB port Callout number 2 on the device.
  3. Plug the other end of the power cable into a power source.

    The status LED is solid red when the device is charging. The status LED flashes red when the device cannot charge. Unplug the device and try again.

  4. After the status LED turns solid green, unplug the power cable from the device.
GUID-6949002D-7E0F-4474-AFAC-51EAF713CF4D v2
December 2023