• Drill

• #2 Phillips screwdriver

• Knife or scissors

• Lighter or matches

• Circuit breaker rated for continuous 40 A¹

For installing the mount using bolts and nuts, you will also need:

• 8 mm (⁵/₁₆ in.) drill bit, for drilling holes for bolts and nuts

• 11 mm (⁷/₁₆ in.) combination wrench

• Sheet metal or other suitable material for reinforcing the mounting surface (optional)

For installing jack nuts, you will also need:

• 11 mm (⁷/₁₆ in.) drill bit

• ¹/₂ in. combination wrench