Different button combinations control different features on the Spy Pole™ mount and its accessories.

Spy Pole™ Mount

Feature	Description
Power Button Turn-Off	Press and hold for 3 seconds to turn the device off.
Pairing	Press 3 times in a row to put the Spy Pole™ mount into pairing mode.
Software Update	Press and hold while the Spy Pole™ mount is turned off until the status LED turns yellow. This puts the device in update mode.
Clear Pairings	Within 2 minutes of booting up the device, press the power button 12 times in a row to manually prompt the device to clear all saved pairings, including all stored BLE pairings. The LED flashes red twice.

Spy Pole™ Gesture Remote

Feature	Description
Pairing	Press the and buttons simultaneously 3 times in a row to put the gesture remote into pairing mode.
Reset	Press and hold the and buttons simultaneously until the LED flashes (at least 8 seconds) to reset the device.
Clear Pairings	Within 2 minutes of booting up the device, press the gesture button 12 times in a row to manually prompt the device to clear all saved pairings.

Spy Pole™ Foot Control

Feature	Description
Pairing	Press the and buttons simultaneously 3 times in a row to put the foot control into pairing mode.
Clear Pairings	Within 2 minutes of booting up the device, press 12 times in a row to manually prompt the device to clear all saved pairings.

Spy Pole™ Heading Sensor

Feature	Description
Pairing	Press the button 3 times in a row to put the heading sensor into pairing mode.
Reboot	Press and hold the button for 3 seconds to reboot the device.
Clear Pairings and Calibration	Within 2 minutes of booting up the device, press the button 12 times in a row to manually prompt the device to clear all saved pairings and iron calibration.