Skip to main content

Pairing a Spy Pole Foot Control

The Spy Pole™ mount can pair with one foot control at a time. The Spy Pole™ mount is already paired with the included foot control, but you can also initiate pairing manually if needed.

  1. Turn on the Spy Pole™ mount.
  2. Press on the Spy Pole™ mount three times.
    The LED turns solid blue, indicating that the device is pairing.
  3. On the foot control, press the top two programmable buttons simultaneously three times.
    The LED on the foot control flashes blue, indicating that the device is pairing.
  4. Wait for the two devices to pair.
    The LED on the Spy Pole™ mount turns green again and the LED on the foot control flashes green after the devices are paired successfully.
GUID-5E9D5954-EED9-410E-9E9E-D57EBC1DBAD3 v2
September 2026
© 2026 Garmin Ltd.