Network Settings
NOTE:
If a
Garmin® chartplotter is detected on the network, the stereo automatically switches to
GARMIN MARINE NETWORK mode, and all other network settings are disabled.
Select
> SETTINGS > NETWORK.
- DHCP CLIENT
-
Sets the device as a DHCP client. This is the default setting for all devices that are not configured to be a DHCP server.
- STATIC IP
-
Allows you to set a static IP address for the device (Setting a Static IP Address).
- DETAILS
-
Shows information about the network configuration.
- ADVANCED
-
Allows you to configure the DHCP server and reset all network settings for this stereo to the factory default values.
- SAVE
-
Allows you to save changes to the network settings.