Stereo Buttons and Status LEDs
Because this device is designed to be installed in a location that may not be easily accessible, almost all playback and device interaction is done through a network-connected remote control, stereo, or chartplotter. In some instances, you may need to watch the LEDs or press the buttons on the device itself.
Do not leave the helm unattended to interact with this device. Leaving the helm unattended or becoming distracted by this device could lead to an accident resulting in serious personal injury or death.
|
|
Press to turn on the stereo. Press and hold for two seconds to turn off the stereo. Press and hold for ten seconds to reset the stereo. |
|---|---|
|
|
Press to make the stereo discoverable to BLUETOOTH® devices. |
|
|
Press and hold both buttons together for ten seconds to revert the stereo to factory settings. |
|
Icon |
LED Activity |
LED Status |
|---|---|---|
|
|
Solid |
The stereo is receiving power. |
|
|
Blinking |
The stereo is turning on. |
|
|
Solid |
The stereo is on and operating normally. |
|
|
Off |
The stereo is off. |
|
|
Blinking |
The stereo is communicating using Ethernet. |
|
|
Blinking |
The stereo is discoverable to BLUETOOTH devices. |
|
|
Solid |
The stereo is connected to a BLUETOOTH device. |
