Skip to main content

Resetting the Trainer

NOTICE
This deletes all user data and pairing information and resets the trainer to the factory settings. Any data that has been synced to the Tacx® Training app can be restored.
  1. Repeat the following steps 10 times:
    1. Disconnect the trainer power cable.
    2. Wait until the LEDs turn off, and connect the power cable.
  2. After the tenth time, leave the power cable connected.
    All the LEDs flash together (4 times) for 4 seconds, and the trainer reboots.
    TIP: You should wait for the Power symbol LED to be solid Green color symbol (green). If you disconnect the power cable before the LED flash pattern completes, the reset is canceled.
GUID-51949190-2A33-4BC3-94BE-16520334F98A v4
June 2026
© 2022 Garmin Ltd.