Skip to main content

Securing the Remote Trigger Cable

  1. Connect the remote trigger cable to the remote trigger port.

    Diagram of the trigger cable being connected to the battery door
  2. Press the remote trigger cable into the port and rotate it clockwise until it locks into place.
  3. Position the remote trigger Callout number one on the grip of your bow where you can comfortably activate it at full draw.
    NOTE: You should confirm the trigger and the trigger cable are positioned so they do not interfere with the operation of the bow.

    Trigger attached to a bow with callouts
  4. Secure the trigger to the bow using the included tape Callout number two.
    TIP: You can use the extra piece of tape to secure the trigger cable to the riser.
Copyright © Garmin. All rights reserved.GUID-4378DB68-8AE7-4523-866A-66DB070CBA65 v2