Skip to main content

Installing the License Plate Mount with an Extender Plate

An extender plate is included so that you can adjust the mount to accommodate tall license plates.

  1. Plan a path for the cable so that it does not interfere with the operation and function of your motorcycle.
  2. Position the extender plate with the license plate mount so that the assembly accommodates your license plate.

    Assembling the license plate mount
  3. Attach the license plate mount to the extender plate using the four included screws.
  4. Attach the license plate and mount assembly to your motorcycle using the existing license plate hardware.
    NOTE: Some license plates may accommodate only two screws, but you should use four screws when possible.
  5. Ensure the mount is securely attached to the motorcycle near the sensor. If your license plate is mounted with only two screws, or if the existing license plate screws are not close to the sensor, you should use adhesive strips (included) or additional fasteners.
  6. Secure the cable, and connect it to the battery and zūmo™ R1 Radar system.
GUID-3B03A850-46B2-47F7-B7AF-7CD84686A1DA v2
February 2025
© 2025 Garmin Ltd.