You can install the storage hook to hang up your headset when you aren't using it.
-
Clean the mounting location using water or isopropyl alcohol, and a lint-free cloth.
The mounting location must be free of dust, wax, oils, or coatings.
-
Remove the protective film from the adhesive on the back of the storage hook.
-
Press the storage hook against the mounting surface and apply pressure for 30 seconds.
-
Wait at least one hour before using the storage hook.
You can hang the headset over the storage hook. If your headset has a removable earcup, you can place the earcup in the compartment at the center of the storage hook.
![Image of a headset installed in a storage hook](../Shared/GUID-E8A58E75-47BB-4945-9CA6-16D465B907C7-high.jpg)