Status Bar
The status bar at the top of the screen displays labels and icons to report the status of the device.
The first label on the left indicates the current VHF region. Other labels and icons on the left indicate VHF status. The icons on the right side of the status bar relate to general device status.
You can drag the bar down from the top of the screen to open the controls panel (Controls Panel).
Refer to the table to identify the other labels and icons on the status bar.
|
|
Transmit power is set to high. |
|---|---|
|
|
The volume for the fist mic and the external speaker (if applicable) are both set to zero. |
|
|
There are unread DSC messages. |
|
|
The VHF antenna is receiving a VHF transmission. |
|
|
AIS collision alarms are turned off. |
|
|
There is no GPS signal. |
|
|
The fist mic is disconnected. |
|
|
There is a problem with the VHF, DSC, or AIS system. |
|
|
The radio's Wi‑Fi® network is on. |
|
|
All systems are operating normally. |
|
|
There is a potential issue with one or more systems. |
|
|
There is a system error. |
