Enabling ATIS

Before you can enable ATIS, you must enter an ATIS ID (Entering Your ATIS ID Number) and select an applicable VHF region (Selecting your VHF Region).

Select > Settings > VHF Region.
Select Inland Waterways to turn on ATIS.

NOTE: ATIS is available only in the regions in which it is used. If the Inland Waterways option is not available, you must select a different VHF region before you can turn it on (Selecting your VHF Region).

NOTE: When ATIS is turned on, watch modes and DSC (Digital Selective Calling) are disabled, and some VHF channels on the international band are restricted to low power (1 W).

Garmin Signal™ VHF

Previous Topic

Next Topic

Download PDF

Print Page

Enabling ATIS