Connecting a Mobile Device

You must connect the STRIKER™ Cast device to the STRIKER Cast app on your mobile device to see sonar data.

TIP: The status LED flashes red or green and red when the device is ready to connect to the STRIKER Cast app.

From the app store on your mobile device, install and open the STRIKER Cast app.
Sign in to your Garmin^® account.

TIP: If you do not have an account, select Create One.
Put the device in water, with the two pins in contact with the water, to turn on the STRIKER Cast device and prepare it to connect.

TIP: You can also connect the device to USB power and then immediately disconnect it to turn on the device and prepare it to connect. The status LED flashes green and red when the device is ready to connect to the STRIKER Cast app.

TIP: As a third option to pair, you can connect the device to USB power. The status LED flashes red when the device is ready to connect to the app when connected to power.
Select Connect your STRIKER Cast > Start.
Select your device from the list.

The serial number is printed on the bottom of the device.

After you connect successfully, a message appears, and you can see sonar data when the device is in the water.

STRIKER™ Cast