Source Settings
Select
> SETTINGS > SOURCE, and select the name of the source you want to configure.
Not all options are available for every source on the stereo.
- SOURCE ENABLED
-
Enables and disables the source on this stereo. You may want to disable sources that will never be used on the stereo so they no longer appear on the source-selection screen.
- GROUP ENABLED
-
Enables and disables the sharing of the source when connected to other stereos in a group (Fusion PartyBus Networking). You may want to disable sharing for some sources, such as BLUETOOTH, because streaming over the Fusion PartyBus™ network introduces a small audio lag that is not desirable in some situations.
- SOURCE NAME
-
Changes the name of the source as it appears on this stereo. This also affects how the source appears to other stereos in a group.
Configuring the Antenna Ports for DAB and FM Antennas
There are two antenna ports on the stereo, and you can connect a DAB antenna and an FM antenna to either of them, depending on the type of connector on the antenna. After connecting an antenna, you must configure the stereo to use the antenna properly.
-
Select
> SETTINGS > SOURCE > DAB.
-
Select an option:
-
To configure an antenna port for a DAB antenna, select DAB ANTENNA.
-
To configure an antenna port fo an FM antenna, select FM ANTENNA
-
- Select the antenna port where you connected the antenna.
- Repeat these steps for the other antenna, if necessary.
-
If the connected antenna requires power from the stereo, select
> SETTINGS > SOURCE > DAB and select
ANTENNA 1 POWER or
ANTENNA 2 POWER depending on which port you connected the antenna (Optional).