Going for a Ride

If you are using a wireless sensor or accessory, it can be paired and activated during initial setup (Pairing Your Wireless Sensors).

  1. Hold Power symbol to turn on the device.
  2. Go outside, and wait while the device locates satellites.

    GPS status symbol appears on the biking profile when the device is ready.

  3. From the home screen, swipe left or right to change the biking profile (Home Screen Overview).
  4. If necessary, select Checklist symbol to complete your pre-ride checklist, and select Checkmark symbol.

    Checklist and ride staging options
  5. Press Start stop symbol to start the activity timer.

    Ride data
    NOTE: History is recorded only while the activity timer is running.
  6. Swipe left or right to view additional data screens (Adding a Data Screen).

    You can swipe down from the top of the data screens to view the widgets (Customizing the Widgets).

  7. If necessary, hold a data field and select Pencil symbol or Data screen settings symbol to edit the data field or data screen during the ride.
  8. If necessary, tap the screen to view status overlay data (including battery life) or return to the home screen.
  9. Press Start stop symbol to stop the activity timer.
  10. Select Save.
  11. If necessary, select Accept to confirm your ride gear.
    TIP: You can add and delete gear in your Garmin Connect™ account.
  12. Select Checkmark symbol.
GUID-29C8FC85-6D84-4BD8-8695-745B20B1ED2D v1
October 2026