Skip to main content

Changing the Selected Course While in an Approach Mode:

When the navigation source for the approach is VOR or localizer, the Selected Course can be changed by the pilot.

If the FMS knob is configured to adjust the Course, use the Inner DCK to adjust the course.

Or:

  1. Touch the CRS Indicator Button on the PFW to display the 'Course' numeric keypad.
  2. Touching the keypad numbers and then touching the Enter Button will set the Selected Course.

    Or:

    Touching the Direct Button will sync the Selected Course to the course that runs directly from the aircraft to the NAVAID or OBS Mode fix.

    Or:

    With the 'Course' numeric keypad open, use the Inner DCK or Outer DCK to adjust the course clockwise and counter-clockwise.

190-03123-21 Rev A
July 2026
© 2026 Garmin Ltd.