Skip to main content

Entering a COM1 or COM2 Frequency from the Flight Plan Page on the MFW:

  1. Touch the Flight Plan Button in the MFW App bar.

    Or:

    Use the DCK to navigate to the Flight Plan Page.

  2. Select a waypoint or airport from the flight plan that has been entered by touching it or using the DCK.
  3. Select the Waypoint Info Button by touching it or use the DCK to scroll to, and select it.
  4. If Multiple Frequencies are Available:
    1. With the "Airport Info" window open, touch the Frequency Tab.
    2. Select the desired frequency by touching it, or using the DCK.
    3. The next available window will allow the pilot to load the frequency into any available radios by touching the Active Button or Standby Button.
  5. Only One Frequency Available:
    1. With the information page open touch the Frequency Datafield Button displayed on the information map.
    2. The next available window will allow the pilot to load the frequency into any available radios by touching the Active Button or Standby Button.
190-03123-21 Rev A
July 2026
© 2026 Garmin Ltd.