Settings
Changing the Units of Measure
-
Select an option:
-
To change the units of measure during a session, press OK, and select UNITS.
-
To change the units of measure outside of a session, select .
-
- Select a unit of measure, and press OK.
Changing the Display Color
-
Select an option:
-
To change the display color during a session, press OK, and select DISPLAY COLOR.
-
To change the display color outside of a session, select .
-
- Press OK to cycle through the color options.
Changing the Backlight Brightness
-
Select an option:
-
To change the backlight brightness during a session, press OK, and select BACKLIGHT.
-
To change the backlight brightness outside of a session, select .
-
- Press OK to cycle through the brightness levels.
Changing the Backlight Timeout
The backlight timeout setting sets how long the screen backlight stays on after a period of inactivity.
-
Select an option:
-
To change the backlight timeout during a session, press OK, and select BACKLIGHT TIMEOUT.
-
To change the backlight timeout outside of a session, select .
-
- Press OK to cycle through the time intervals.
Enabling Projectile Weight Entry
You can enter your projectile weight to calculate the kinetic energy and power factor of your projectile.
Enabling Downrange Mode
When placing or adjusting the device in downrange mode, remain aware of your surroundings and follow any applicable safety protocols associated with the area in which you are shooting. Failure to do so could cause property damage, serious personal injury, or death.
Use of this device in downrange mode could result in possible property damage due to your shooting activities or the shooting activities of others. Garmin® claims no responsibility for and does not warranty such property damage.
Downrange mode sets the screen to flash five times after the chronograph detects a shot. When you are using the device to track velocity downrange, this feature can help improve your awareness of when the chronograph detects a shot.
Changing the Device Language
- Select .
- Select a language.
Viewing Device Tips
You can view device tips about how to use some chronograph features.
- Select .
- Select a topic.
Connectivity Settings
Select .
- BLUETOOTH
- Enables or disables Bluetooth® technology.
- PAIR PHONE
- Enables you to pair your Xero® C2 chronograph with the ShotView™ app on your phone (Pairing Your Smartphone).
- PAIR GARMIN WATCH
- Enables you to pair your chronograph with a compatible Garmin watch (Pairing a Garmin Watch).
- FORGET ALL PAIRED DEVICES
- Removes all connected phones and watches from the list of paired devices. This option is available only after a phone or watch is paired.
Resetting Data and Settings
The chronograph offers options for deleting your user data and resetting all settings to the factory default values.
- Select .
-
Select an option:
-
To delete all of your recorded sessions from the chronograph, select CLEAR ALL SESSIONS.
-
To reset all settings to factory default values and delete all user data and sessions, select FACTORY RESET.
-
- Select YES.
Setting a Device Passcode
If you enter your passcode incorrectly three times, the device locks temporarily. After five incorrect attempts, the device deletes your data and resets to the factory default settings.
You can set up a device passcode to prevent unauthorized users from using your device. Once enabled, you must enter the passcode immediately after you turn on the device.
- Select .
- Enable the PASSCODE option.
- Enter a four-digit passcode, and select CONFIRM.
Changing Your Device Passcode
You must know your existing device passcode to change it. If you enter your passcode incorrectly three times, the device locks temporarily. After five incorrect attempts, the device deletes your data and resets to the factory default settings.
- Select .
- Enter your current four-digit passcode.
- Select CHANGE PASSCODE.
- Enter your current four-digit passcode.
- Enter a new four-digit passcode.
Deleting Your Device Passcode
You must know your existing device passcode to delete it. If you enter your passcode incorrectly three times, the device locks temporarily. After five incorrect attempts, the device deletes your data and resets to the factory default settings.
- Select .
- Enter your current four-digit passcode.
- Select DELETE PASSCODE.
- Enter your current four-digit passcode.