Skip to main content

Configuring the OnDeck Wi‑Fi Network

NOTE: If the GTB 10 hub is not connected to a compatible chartplotter through the Garmin® Marine Network, you must complete these steps within 30 minutes of turning on the device. The device automatically turns off after 30 minutes of inactivity.

If the GTB 10 hub is not connected to a chartplotter, you must change the Wi‑Fi® password for security reasons and to properly register the device to your account.

  1. Open the ActiveCaptain® app.
  2. When prompted, enter a new network name and password.

    If you are not prompted, you can select Settings > OnDeck Settings > Wi-Fi Name and Password.

  3. Connect to the re-configured network in the Wi‑Fi settings for the mobile device.
GUID-1A1F58AA-95F0-4800-804B-4976606478EE v5
November 2023
© 2020 Garmin Ltd.