Installing the Magnetic Mount in Your Vehicle

WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight.

WARNING

Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference with some internal medical devices and electronic devices, including pacemakers, insulin pumps, or hard drives in laptop computers. Keep the device away from medical devices and electronic devices.

  1. Clean and dry your windshield and the suction cup with a lint-free cloth.
  2. Press the suction cup to the windshield, and flip the lever Callout number one.

    Diagram of the mount assembly with callouts
  3. Connect the ball of the suction cup mount Callout number two and the ball of the powered magnetic mount Callout number three to the double-socket arms Callout number four.
  4. Connect the double-ball link Callout number five to both double-socket arms.
  5. Tighten the knobs on both double-socket arms slightly.
  6. If necessary, rotate the powered magnetic mount so the Garmin® logo faces right-side up, and adjust the mount for better viewing and operation.
  7. Tighten the knobs to secure the mount.
Copyright © Garmin. All rights reserved.GUID-16C78876-E016-40FD-8A0A-049BA52B462B v6