Skip to main content

Replacing the Memory Card

You can replace the memory card to increase the storage capacity or to replace a card that has reached the end of its useful life. The camera requires a microSD® memory card from 32 to 256 GB with a speed rating of Class 10 or higher.

You can replace the memory card from either of the two memory card slots located on the device (Device Overview).

  1. To replace the memory card under the back panel, press on the two marked areas, and slide the back panel Callout number one down to open it.

    Diagram of the microSD card port location with callouts
  2. Locate the memory card slot Callout number two.
  3. Press the existing memory card in until it clicks, and release it.

    The existing memory card ejects from the slot.

  4. Remove the existing card from the slot
  5. Insert the new memory card into the slot.
  6. Press the card in until it clicks.
  7. Replace the panel, and slide it upward until the panel clicks into place.
Copyright © Garmin. All rights reserved.GUID-16C78876-E016-40FD-8A0A-049BA52B462B v6