Skip to main content

Mounting Your Tread Base Edition in an Automobile

NOTICE

Before mounting the device, check the local laws pertaining to windshield mounting.

WARNING

Do not use the suction cup mount on a motorcycle.

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other important information.

NOTE: The automobile mount is not included with all device models. Go to garmin.com to purchase optional accessories.
  1. Plug the automotive power cable Callout number 1 into the port Callout number 2 on the device.

    Device and power cable connecting to the automotive mount with callouts
  2. Remove the clear plastic from the suction cup Callout number 3.
  3. Clean and dry your windshield and the suction cup with a lint-free cloth.
  4. Press the suction cup to the windshield, and flip the lever Callout number 4 back toward the windshield.
  5. Snap the cradle Callout number 5 onto the suction cup arm.
  6. Fit the bottom of your device into the cradle.
  7. Press the device into the cradle until it snaps into place.
  8. Plug the other end of the automotive power cable into a power outlet.
GUID-16B1D74D-857B-4FFB-8DE2-A0960FE0D090 v7
June 2024
© 2020 Garmin Ltd.