Routing Cables Over the Transom
To connect your transducer cable, you should route it over the top of your transom before connecting it to your chartplotter.
When routing the transducer cable over the transom, you must secure it so it won't get caught on any passing debris such as floating logs or tree limbs.
Avoid routing the cable close to electrical wires or other sources of electrical interference. Electrical interference can result in poor product performance.
NOTE:
If the included transducer cable is not long enough, you can connect optional extension
cables. Extension cables are available at buy.garmin.com or from your local Garmin® dealer.
- Route the transducer cable over the top of the transom, and connect it to your chartplotter.
- Secure the cable along the route so it cannot snag on debris in the water or people in the vessel.