T-connector

010-11078-00

Connects devices to the backbone.

You must use T-connectors properly when connecting devices to your NMEA 2000^® network (Linear Backbone Construction).

In-line terminator

010-11096-00

You can use this instead of a T-connector and separate male terminator (Network Termination).

Power isolator

010-11580-00

Prevents a device from providing power to the NMEA 2000 (Power Isolation).

Male terminator

010-11080-00

You must install terminators on both ends of the backbone (Network Termination).

Female terminator

010-11081-00

You must install terminators on both ends of the backbone.

Power cable

010-11079-00

Connects the NMEA 2000 network to a 12 Vdc power source (Power Connection Considerations).

2 m (6.5 ft.)

3 A fuse included

Backbone or drop cable

010-11076-03: 0.3 m (1 ft.)

010-11076-00: 2 m (6.5 ft.)

010-11076-04: 4 m (13 ft.)

010-11076-01: 6 m (20 ft.)

010-11076-02: 10 m (33 ft.)

010-11171-01: 30 m (98 ft.) (spool)

A cable up to 6 m (20 ft) can be used as a backbone cable or a drop cable.

A cable longer than 6m (20 ft) can be used as a backbone cable only.

Right-angle drop cable

010-11089-01: 0.3 m (1 ft.)

010-11089-00: 2 m (6.5 ft.)

Can be used when connecting to a device with minimal clearance for the rear connectors.

Field-installable connector

010-11094-00: male

010-11095-00: female

Can be used to create a backbone or drop cable for a custom length.

Can be used to shorten any Garmin NMEA 2000 backbone or drop cable