Configuring the Autopilot

The autopilot system must be configured and tuned to your boat dynamics. You should use the Dockside Wizard and the Sea Trial Wizard to configure the autopilot. These wizards walk you through the necessary configuration steps.

If your autopilot package did not contain a helm control, you must configure the autopilot system using a compatible chartplotter on the same NMEA 2000® network as the autopilot CCU. These instructions address configuration using either a helm control or a chartplotter.

GUID-0AA4C72D-D42C-4E3C-B2D9-BE6A4A856E49 v1
September 2026