Determining the Radar Mounting Height
If you plan to install the radar on a roof or hard top, you should install it high enough to avoid interference from the surface.
-
Based on the shape of the roof, complete an action:
-
Measure the distance from the intended mounting location to the furthest front corner of a rectangular roof .
-
Measure the distance from the intended mounting location to the front apex of a curved roof .
-
-
Use this equation to determine the mounting height of the radar based on the distance you measured in the previous step:
(Distance (mm) × 0.222) - 150 = height (mm)
(Distance (in.) × 0.222) - 6 = height (in.)
For example, if the mounting location is 2 m (6.6 ft.) from the corner of the roof, this is how you would complete the equation to determine the mounting height after converting to mm (or in.):
(2000 mm × 0.222) - 150 = 294 mm
(78 in. × 0.222) - 6 = 11.3 in.