Device Status LED
|
LED Activity |
Status |
|---|---|
|
Single flashing |
The device is in pairing mode. The device is in pairing mode for 5 minutes or until you press the device button. |
|
Single flashing |
The battery level is good, and the device is in smart mode. NOTE: In smart mode, ANT+ technology is turned on, and Bluetooth® technology is turned off. |
|
Double flashing |
The battery level is good, and the device is in active mode. The device can be controlled by a paired compatible Garmin device, or a phone connected with the Varia app. NOTE: In active mode, both ANT+ technology and Bluetooth technology are turned on. |
|
Rapidly flashing |
The battery is charging. As the charge increases, the flash period increases until it is fully charged. |
|
Solid |
The battery is fully charged. |
|
Alternating |
The device is updating software (Device Status LED for Software Updates). |
|
Alternating |
The device is uploading videos to Garmin Vault (Vault Storage). |
|
Double flashing |
The battery level is low with approximately 60 or fewer minutes of battery life remaining, and the device is in active mode. |
|
Single flashing |
The battery level is low with approximately 60 or fewer minutes of battery life remaining, and the device is in smart mode. |
|
Slowly flashing |
An error occurred. You may need to reset the device (Resetting the Device). |
