Customizing Headlight Settings with Your Edge Bike Computer

Before you can customize Varia device settings with your Edge bike computer, you must pair the devices (Pairing the Varia Vue with a Compatible Edge Bike Computer).

WARNING

This device’s light can be programmed to emit light at varying degrees of brightness and flash at various intervals. Contact your health care provider if you have epilepsy or are sensitive to bright or flashing lights.

1. From the Sensors menu, select Lights.
2. Select an option:
   • Select Enable to enable the light network.
   • Select Network Options > Light Mode to set the light intensity mode for all lights in your network (Light Mode Settings).
   • Select Network Options > Light Beam Activated to turn on the headlight automatically when the timer starts or when the Edge bike computer turns on.
   • Select Network Options > Test Lights to check that each light in your network is set up correctly (Testing the Light Network).
   • Select Network Options > Auto Beam Adjustment to adjust the headlight intensity automatically based on the rate of speed. A high intensity is used at high speeds, and a low intensity is used at low speeds (Automatic Beam Intensity).
   • Select a light to view device information and customize each light in your network (Light Network Settings).