Installing the Varia RDU Device

NOTE: If you do not have a Varia RDU device, you can use a compatible Edge device.

You can install the device on the stem or the handlebars.

1. Select a secure location to mount the device where it does not interfere with the safe operation of your bike.
2. Place the rubber disk on the back of the bike mount.

   The rubber tabs align with the back of the bike mount so it stays in place.

   

3. Place the bike mount on the bike stem.
4. Attach the bike mount securely using the two bands .
5. Align the tabs on the back of the device with the bike mount notches .
6. Press down slightly and turn the device clockwise until it locks into place.