Configuring the Light Network

1. Select > Sensors > Lights.
2. Select an option:
   • Select Enable to enable the light network.
   • Select Network Options to configure your light network (Light Network Options).
   • Select a bike light to configure it individually (Bike Light Settings).

Light Network Options

From the Sensors menu, select Lights > Network Options.

Light Mode: Sets the light mode for your light network (Light Network Modes).

Light Beam Activated: Sets whether your bike lights activate when you turn on the bike computer or when you start an activity timer.

Test Lights: Allows you to test each connected bike light.

Auto Beam Adjustment: Allows a connected headlight to increase its brightness level when you increase your speed (applicable only with a compatible headlight).

Light Network Modes

From the Sensors menu, select Lights > Network Options > Light Mode.

Auto: Sets the tail light and headlight modes automatically depending on ambient light.

High Visibility: Sets the tail light and headlight to the highest visibility mode.

Trail: Activates the tail light only when ambient light is low. Sets the headlight mode automatically depending on ambient light.

Individual: Each connected bike light operates independently. You can manually select the light mode for each light.

TIP: You can always override the light network mode and control individual bike lights in your network using the Light widget (Viewing the Light Widget).