Creating a Custom Light Mode

You can configure your own flashing pattern by creating a custom light mode.

1. From the Varia app, select your device icon at the top of the screen.
2. Select Light Modes > Edit > Create Custom Light Mode.
3. Select an option:
   • To create a solid light mode, select Solid, and use the slider to set the brightness level.
   • To create a flashing light mode, select Add Flash.
   • To set the duration and brightness level of a flash, select the flash from the list, and use the sliders to set each parameter.

   NOTE: To create a pause between flashes, you must add a flash and set its brightness to 0%. If you add consecutive flashes with the same brightness level, the light does not turn off in between them.

   • To reorder the flash sequence, select next to a flash, and drag it up or down in the list.
   • To test your custom light mode, select Preview.
4. Select Save.
5. Enter a name, and select Save.
6. Select to add your custom light mode to the light mode sequence.

NOTE: You can have up to six light modes in the light mode sequence. If necessary, you can select to remove a light mode from the sequence.