Installing the Shoe Cleats for Rally XC

NOTE: The left and right cleats are the same.

1. Inside your shoe, lift the insole and insert the 2-hole cleat mount and the insole washer .
2. Apply a thin layer of grease on the cleat bolt threads.
3. Align the cleat , washer , and bolts .

   PIC

4. Use a 4 mm hex key to loosely attach each bolt to the sole of the shoe.
5. Adjust the cleat to the shoe in your preferred position.

   This can be adjusted after a trial ride.

6. Tighten the cleat firmly to the shoe.

   NOTE: Garmin recommends a torque of 4 to 6 lbf-ft. (5 to 8 N-m).