Installing the Shoe Cleats for Rally RS and Rally RK

NOTE: The left and right cleats are the same.

1. Apply a thin layer of grease on the cleat bolt threads.
2. Align the cleat , washers , and bolts .

   

3. Use a 4 mm hex key to loosely attach each bolt to the sole of the shoe.
4. Adjust the cleat to the shoe in your preferred position. This can be adjusted after a trial ride.
5. Tighten the cleat firmly to the shoe.

   NOTE: Garmin recommends a torque of 4 to 6 lbf-ft. (5 to 8 N-m).