RALLY RS/RK Owner’s Manual

Pairing Rally with Your Edge 830 or Edge 1030

Before you can view Rally data on the Edge device, you must pair the devices.

Pairing is the connecting of ANT+ or Bluetooth® wireless sensors. This procedure contains instructions for the Edge 830 or 1030 devices. If you have another compatible device, see Other Compatible Devices, or go to www.support.garmin.com.

  1. Bring the Edge device within 3 m (10 ft.) of the sensor.

    NOTE: Stay 10 m (33 ft.) away from other riders’ sensors while pairing.

  2. Turn on the Edge device.
  3. Select > Sensors > Add Sensor > Power.
  4. Rotate the pedals a few times in order to activate the Rally system.
  5. Select your sensor.
  6. Select Add.

    When the sensor is paired with your device, is solid. You can customize the data fields to display power data (Customizing the Data Fields). You can customize the Rally settings and receive software updates (Updating the Rally Software Using the Edge 130, 530, 830, or 1030).