Running Power Settings

From the watch face, press , select Activities, select a running activity, press , select the activity settings, and select Running Power.

Status: Enables or disables recording Garmin running power data. You can use this setting if you prefer to use third-party running power data.

Source: Allows you to select which device to use to record running power data. The Smart Mode option automatically detects and uses the running dynamics accessory, when available. The watch uses wrist-based running power data when an accessory is not connected.

Account for Wind: Enables or disables using wind data when calculating your running power. Wind data is a combination of the speed, heading, and barometer data from your watch and the available wind data from your phone.

Chest Heart Rate While Swimming

The HRM 600, HRM-Pro series, HRM-Swim, and HRM-Tri heart rate accessories record and store your heart rate data while you are swimming. To view your heart rate data, you can add heart rate data fields (Customizing the Data Screens).

NOTE: Chest heart rate data is not visible on compatible watches while the heart rate monitor is underwater.

You must start a timed activity on your paired watch to view stored heart rate data later. During rest intervals when out of the water, the heart rate accessory sends your heart rate data to your watch. Your watch automatically downloads stored heart rate data when you save your timed swim activity. Your heart rate accessory must be out of the water, active, and within range of the watch (3 m) while data downloads. Your heart rate data can be reviewed in the watch history and on your Garmin Connect account.

If both wrist-based heart rate and chest heart rate data are available, your watch uses the chest heart rate data.

Using the Varia Camera Controls

NOTICE

Some jurisdictions may prohibit or regulate the recording of video, audio, or photographs, or may require that all parties have knowledge of the recording and provide consent. It is your responsibility to know and follow all laws, regulations, and any other restrictions in jurisdictions where you plan to use this device.

Before you can use the Varia camera controls, you must pair the accessory with your watch (Pairing Your Wireless Sensors).

1. Select an option:
   • Add the Camera Controls control to your watch (Customizing the Controls Menu).
   • Add the Camera Controls glance to your watch (Customizing the Glances List).
2. From the Camera Controls control or glance, select an option:
   • Select > to view the camera settings.
   • Select > to record the ride.
   • Select to take a photo.
   • Select to save a clip.

inReach Remote

The inReach remote function allows you to control your inReach satellite communicator using your Forerunner watch. Go to Garmin.com.sg/buy for more information about compatible devices.

Using the inReach Remote

Before you can use the inReach remote function, you must add the inReach glance to the glances list (Customizing the Glances List).

1. Turn on the inReach satellite communicator.
2. On your Forerunner watch, press from the watch face to view the inReach glance.
3. Press to search for your inReach satellite communicator.
4. Press to pair your inReach satellite communicator.
5. Press , and select an option:
   • To send an SOS message, select Initiate SOS.

   NOTE: You should only use the SOS function in a real emergency situation.

   • To send a text message, select Messages > New Message, select the message contacts, and enter the message text or select a quick text option.
   • To send a preset message, select Send Preset, and select a message from the list.
   • To view the timer and distance traveled during an activity, select Tracking.