EDGE 530 Owner’s Manual

Auto Lap

Marking Laps by Position

You can use the Auto Lap feature to mark the lap at a specific position automatically. This feature is helpful for comparing your performance over different parts of a ride (for example, a long climb or training sprints). During courses, you can use the By Position option to trigger laps at all of the lap positions saved in the course.

  1. Select Menu > Settings > Activity Profiles.
  2. Select a profile.
  3. Select Auto Features > Auto Lap > Auto Lap Trigger > By Position > Lap At.
  4. Select an option:
    • Select Lap Press Only to trigger the lap counter each time you select and each time you pass any of those locations again.
    • Select Start and Lap to trigger the lap counter at the GPS location where you select and at any location during the ride where you select .
    • Select Mark and Lap to trigger the lap counter at a specific GPS location marked before the ride and at any location during the ride where you select .
  5. If necessary, customize the lap data fields (Adding a Data Screen).

Marking Laps by Distance

You can use the Auto Lap feature to mark the lap at a specific distance automatically. This feature is helpful for comparing your performance over different parts of a ride (for example, every 10 miles or 40 kilometers).

  1. Select Menu > Settings > Activity Profiles.
  2. Select a profile.
  3. Select Auto Features > Auto Lap > Auto Lap Trigger > By Distance > Lap At.
  4. Enter a value.
  5. If necessary, customize the lap data fields (Adding a Data Screen).