Planning and Riding a Course

You can create and ride a custom course. A course is a sequence of waypoints or locations that leads you to your final destination.

TIP: You can also create a custom course in the Garmin Connect app and send it to your device ().

1. Select Navigation > Courses > > Course Creator.
2. Select an option:
   • To select your current location on the map, select Current Location.
   • To select a location on the map, select Use Map, and select a location.
   • To select a saved location, select Saved & Recent > Saved Locations, and select a location.
   • To select a saved segment, select Saved & Recent > Segments, and select a segment.
   • To select a location for which you recently searched, select Saved & Recent > Recent Finds, and select a location.
   • To browse for and select a point of interest, select Points of Interest, and select a nearby point of interest.
   • To select a city, select Cities, and select a nearby city.
   • To select an address, select Search Tools > Addresses, and enter the address.
   • To select an intersection, select Search Tools > Intersections, and enter the street names.
   • To use coordinates, select Search Tools > Coordinates, and enter the coordinates.
3. If prompted, select to add the location to the course.

A map of the course appears.

4. From the map, select an option to continue adding locations:
   • Select > to add another location using the map.
   • Select to search for another location.
   • Select to undo the previously added location.
5. Repeat steps 2 through 4 until you have selected all locations for the route.
6. If necessary, swipe up from the bottom of the screen, and select an option:
   • Hold on a location, and drag it to reorder the list.
   • Swipe left and select to remove a location.
7. If necessary, select an option:
   • To calculate the route with the same route back to the start location, select > Out and Back.
   • To calculate the route with a different route back to the start location, select > Loop to Start.
8. Select Save.
9. Enter a name for the course.
10. Select > Ride.