Alerts

You can use alerts to train toward specific time, distance, calorie, heart rate, cadence, and power goals. Alert settings are saved with your activity profile.

Setting Range Alerts

If you have an optional heart rate monitor, cadence sensor, or power meter, you can set up range alerts. A range alert notifies you when the device measurement is above or below a specified range of values. For example, you can set the device to alert you when your cadence is below 40 RPM and over 90 RPM. You can also use a training zone for the range alert (Training Zones).

1. Select > Activity Profiles.
2. Select a profile.
3. Select Alerts.
4. Select Heart Rate Alert, Cadence Alert, or Power Alert.
5. Select the minimum and maximum values, or select zones.

Each time you exceed or drop below the specified range, a message appears. The device also beeps if audible tones are turned on (Turning the Device Tones On and Off).

Setting Recurring Alerts

A recurring alert notifies you each time the device records a specified value or interval. For example, you can set the device to alert you every 30 minutes.

1. Select > Activity Profiles.
2. Select a profile.
3. Select Alerts.
4. Select an alert type.
5. Turn on the alert.
6. Enter a value.
7. Select .

Each time you reach the alert value, a message appears. The device also beeps if audible tones are turned on (Turning the Device Tones On and Off).

Setting Smart Eat and Drink Alerts

A smart alert notifies you to eat or drink at strategic intervals based on current ride conditions. Smart alert estimates for a ride are based on the temperature, elevation gain, speed, duration, and heart rate and power data (if applicable).

1. Select > Activity Profiles.
2. Select a profile.
3. Select Alerts.
4. Select Eat Alert or Drink Alert.
5. Turn on the alert.
6. Select Type > Smart.

Each time you reach the estimated smart alert value, a message appears. The device also beeps if audible tones are turned on (Turning the Device Tones On and Off).