Transceiver Alerts
|
Alert Message |
Cause |
Device Action |
|
None |
Your paired dive computer has lost communication with the transceiver for 30 seconds. |
The tank pressure value flashes yellow. |
|
%1 is below reserve pressure. |
Your tank pressure is below the reserve pressure level. "%1" is replaced with the transceiver name. |
The tank pressure value turns yellow. The paired dive computer vibrates and plays a warning tone. |
|
PRESSURE CRITICAL %1 pressure is critically low. |
Your tank pressure is below the critical pressure level. "%1" is replaced with the transceiver name. |
The tank pressure value flashes red. The paired dive computer vibrates and plays a warning tone. |
|
TANK BATTERY CRITICAL %1 battery critically low. |
Fewer than 20 hours of dive time remain. "%1" is replaced with the transceiver name. |
The transceiver name flashes BATT. LOW when the battery is critically low. The paired dive computer vibrates and plays a warning tone. |
|
Lost communication with %1. |
Your paired dive computer has lost communication with the transceiver for 60 seconds. |
The transceiver name flashes NO COMMS, dashed lines replace the tank pressure value, and the tank pressure value flashes red. The paired dive computer vibrates and plays a warning tone if connection alerts are enabled. |
|
Transmitter %1 failed to connect. |
Your paired dive computer cannot connect to the transceiver. You should update both devices to the latest software version. "%1" is replaced with the transceiver name. |
The paired dive computer vibrates and plays a warning tone. |
Enabling Lost Transceiver Alerts
Your paired dive computer can lose communication with the transceiver when the transceiver is out of range, when the transceiver signal is blocked by your body or that of another diver, and when the transceiver loses battery power. You can enable an alert that notifies you when your paired dive computer has lost communication with the transceiver for 60 seconds.
Select Dive Setup > Dive Network & Air Integration > Connection Alert.