System Settings
From the home screen, scroll down to the extended app list, and select Settings > System.
Text Language: Sets the language displayed on the dive computer (My device is in the wrong language).
Compass: Calibrates the compass and sets the north reference of the compass (Compass).
Satellites: Sets the default satellite system (Satellite Settings).
Time: Sets the time format.
Advanced: Sets the unit and position format preferences, and sets the dive computer to use MTP (media transfer protocol) or Garmin mode when connected to a computer.
Reset: Resets tissues, deletes data, and resets settings (Resetting All Default Settings).
Check for Updates: Downloads and installs software updates when your dive computer is paired to your phone.
About: Displays device, software, license, and regulatory information.
You can change the satellite systems used by the dive computer. For more information about satellite systems, go to Garmin.com/aboutGPS.
From the home screen, scroll down to the extended app list, and select Settings > System > Satellites.
Off: Disables satellite systems.
GPS Only: Enables the GPS satellite system.
All Systems: Enables multiple satellite systems. Using multiple satellite systems together offers increased performance in challenging environments and faster position acquisition than using GPS only. However, using multiple systems can reduce battery life more quickly than using GPS only.
Resetting All Default Settings
Before you reset all default settings, you should sync the dive computer with the Garmin Dive app to upload your dive data.
You can reset all of the device settings to the factory default values.
- From the home screen, scroll down to the extended app list.
- Select Settings > System > Reset.
- Select an option:
- To reset all of the device settings to the factory default values and save all user-entered information andactivity history, select Reset Default Settings.
- To delete your tissue load data for scuba diving, select Reset Tissues.
NOTE: You should reset your tissue load only if you do not plan to use the dive computer again in thefuture. This can be useful for dive shops that provide dive computers for rent.
- To reset all of the device settings to the factory default values and delete all user-entered information andactivity history, select Delete Data and Reset Settings.