Using Steer-Pilot Mode with the AWA or TWA Setting
Before you can use steer-pilot mode with the Apparent Wind Angle (AWA) setting, you must connect the instrument to a wind sensor, either wirelessly or through the NMEA 2000® network.
Before you can use steer-pilot mode with the True Wind Angle (TWA) setting, you must connect the instrument to a wind sensor, either wirelessly or through the NMEA 2000 network, and you must connect it to a speed sensor or GPS device through the NMEA 2000 network.
You can enter a specific wind-angle value and use the instrument as a steering guide when sailing.
-
From an instrument screen, hold
.
The instrument enters steer-pilot mode.
-
Select an option:
-
If AWA or TWA is shown, proceed to step 4.
-
If something other than AWA or TWA is shown, hold
until the text flashes.
-
-
Press
or 
to select
AWA or
TWA, and press .
-
Press or to enter a numeric value for the wind angle to use when steering.
-
Press to confirm the wind angle.