Using Steer-Pilot Mode with the MEM Settings
Before you can use steer-pilot mode with the Memory (MEM) settings, you must connect the instrument to a heading sensor through the NMEA 2000® network.
The marine instrument can help you when tacking by using stored port and starboard tack angles.
-
From an instrument screen, hold
.
The instrument enters steer-pilot mode.
-
Select an option:
-
If MEM is shown, proceed to step 4.
-
If something other than MEM is shown, hold
until the text flashes.
-
-
Press
or 
to select
MEM, and press .
-
After you make your first trim, push to store the heading value as
MEM1.
-
After you make your second trim, push to store the heading value as
MEM2.