Skip navigation links

Updates & Downloads

GVN60W, KW EU software version 2.90

as of February 21, 2020

Download (35.38 MB)

View installation instructions and system requirements

Installation Instructions

  1. Create a 'garmin' folder on the SD data card (must be at least 100MB of space available on the card).
  2. Download the appropriate self-extracting archive file onto your hard drive.
  3. Run the downloaded executable file.
  4. Click on Browse and select the SD card reader in the list, then select the 'garmin' folder.
  5. Click Unzip to save the files onto the 'garmin' directory on the SD card.
  6. Wait for the message that the update was unzipped successfully and close the updater.
  7. Safely remove SD card from PC.
  8. Insert SD card into GVN60 KW EU. If there is already a card inserted, temporarily remove it.
  9. The update will begin automatically after few minutes and then last for 3~5 minutes. It will probably show 'no navigation' on the screen during the update process. Please do not power off unit while the update is in progress. When finished you can verify the update by checking the version number in Settings->Device->About.
  10. Remove SD card used for software update and reinsert other card if necessary.

System requirements

  1. IBM-compatible PC running Windows 2000 or later operating system and an available SD card reader.