Skip navigation links

Updates & Downloads


DNX7320CN software version 2.30

as of May 9, 2011

Download (7.91 MB)

View installation instructions and system requirements


Change History

Changes made from version 2.10 to 2.30:


Installation Instructions

  1. Create a 'garmin' folder on an SD data card (must be at least 16mb space available on the card).
  2. Download the appropriate self-extracting archive file onto your hard drive.
  3. Run the downloaded executable file.
  4. Click on Browse and select the SD card reader in the list, then select the 'garmin' folder.
  5. Click Unzip to save the files onto the 'garmin' directory on the SD card.
  6. Wait for the message that the update was unzipped successfully and close the updater.
  7. Safely remove SD card from PC.
  8. Insert SD card into Kenwood Navigation System. If there is already a card there, temporarily remove it.
  9. Your Kenwood Navigation System will ask if you would like to update software. Answer 'Yes'.
  10. The update will begin. Do not power off unit while the update is in progress. When finished you can verify the update by checking the version number in Menu->Settings->About->Software.
  11. Remove SD card.

System requirements

  1. IBM-compatible PC running Windows 2000 or later operating system and an available Com 1, 2, 3, or 4 port.
  2. PC Interface Cable for your GPS unit. The PC Interface Cable may be purchased through your local Garmin distributor or ordered direct from our Online Store.