Skip navigation links

Updates & Downloads


Rino 520 Australia software version 2.30

as of November 2, 2007

Download (1.73 MB)

View installation instructions and system requirements


Change History

Changes made from version 2.20 to 2.30:

Changes made from version 2.10 to 2.20:


Installation Instructions

  1. It is recommended that you disable screen savers or other programs running on your PC while you go through the update process. Disruptions to the update process may render your GPS inoperable. If the transfer is interrupted, turn off the GPS and then turn it back on. Reboot your PC, go to step #9 and attempt the download again. GARMIN is not responsible for failed downloads of operating software to the GPS and factory resetting the GPS unit will fall under our Flat Rate Repair Policy.
  2. Click on "Download" and choose to save the file to your computer.
  3. Choose a location where you can easily locate the file by saving it to a location such as the "My Documents" folder or to "C:\".
  4. Once the download is complete, go to the location where you saved the file.
  5. Locate the downloaded file and double-click on it. This will launch the Win-Zip Self Extractor. This program compresses the data to allow for a faster download of the needed files.
  6. A program window will appear asking you where to "Un-zip" the files. This is by default C:\Garmin. You can change this location if you like. Be sure to note where the un-zipped files are going to allow you to find them!
  7. Click on the button labeled "Un-zip".
  8. Once the un-zip process is complete, click on the "Close" button to exit the Win-Zip Self Extractor.
  9. Connect your GPS to your computer using a GARMIN PC Interface cable to an open USB port. Turn the GPS on.
  10. If your computer asks for a driver, please see the software and installation instructions that came with your device, or download and install the USB driver from Garmin's website at www.garmin.com.
  11. Open the C:\Garmin folder (or other folder where you un-zipped the files), locate the file named 'Updater' and double click on it.
  12. You should see the name of your GPS device next to the 'USB Device' option on the Updater program window. Select the 'USB Device' option, then click on 'OK' on the Updater program window to start the data transfer.

System requirements

  1. IBM-compatible PC running Windows 7 SP1 or later operating system and an available USB port.