Updates & Downloads

---

Edge 1030 Bontrager software version 9.00

as of October 23, 2019

Use Garmin Express to install this file.

(27.62 MB)

View system requirements

Notes:

• WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
• If attempts to upload software fail, you may need to return the device to Garmin® for service.

---

Change History

Changes made from version 8.00 to 9.00:

• Added support for Connect IQ 3.1.
• Added support to control Garmin inReach remotely.
• Made improvements to the indoor cycling user experience.
  - Improved smart trainer discovery and initial setup experience when using an Indoor activity profile.
  - Improved the Follow Course experience by enabling UI (map, ClimbPro, Elevation, etc) and data recording from the simulated course.
  - Made improvements to smart trainer sensor calibration.
• Made improvements to the workout user experience.
  - Added FTP line to workout comparison displays.
  - Allowed graphical workout data fields to be configured on regular data screens.
  -Improved the display for open steps on the workout comparison graph.
• Made improvements to the ClimbPro user experience.
  - Made ClimbPro available for navigation to a location.
  - Added a setting in the ClimbPro data screen setup to specify which climbs should be detected (All, Medium/Large, Large Only).
  - Removed the ClimbPro page from the timer loop if there are no climbs left in the ride.
• Made improvements to the Segment user experience.
  - Fixed an issue where segments with slashes in the name would not be processed and would create subfolders on the file system.
  - Fixed an issue where the segment leader could get reset during a sync.
  - Added setting in the Segments menu to set a Default Leader Priority, which allows the user to set a default leader to apply to all segments.
• Fixed an issue with pairing to iPhone 11.
• Fixed an issue where activities could report inaccurate distances if GPS was acquired after the activity started.
• Improved Firstbeat heat acclimation by utilizing weather forecasts.
• Added ability to render Hebrew text for incoming smart notifications. This requires additional font files that can be downloaded through Garmin Express.
• Fixed issues with the map zoom level not being set correctly.
• Fixed an issue where Battery Save Mode could stop working mid-ride.
• Added jump prompts for each jump in cases where there are multiple jumps in a row.
• Fixed issues with the heart rate graph data field.
• Fixed an issue that caused Auto Detect Max HR to always be enabled.
• Improved the y-scaling on the elevation profile.
• Added directional arrows for round trip courses.
• Fixed cosmetic issues with Extended Display mode.
• Added additional info to the nutrition/hydration settings page.
• Turned backlight on when the user laps or there is an autolap during an activity.
• Automatically sized the text in the elevation data field.
• Improved overall device stability by fixing crashes and freezes.

Changes made from version 7.50 to 8.00:

• Training Load Focus. Low Aerobic, High Aerobic, and Anaerobic stats are tracked over a 4 week window and the user should be able to track what needs to be focused on.
• Two-way setting sync. Changes to some settings made on the Edge (zones, user profile, etc) will now be uploaded to Garmin Connect.
• Heat/Altitude Acclimation. Shows user's acclimation to different altitudes and hot/humid environments.
• ClimbPro. See upcoming climbs while riding a course so you can prepare for needed effort
• Power Curve tracking has been added to the My Stats menu.
• Nutrition/Hydration tracking alerts
• Training Plan Review Page Improvements
• Workout Comparison Graph. Provides live feedback while executing a workout.
• Widget Management. Disable and re-order items in the widget loop
• Added ability to sort courses and workouts
• Bike Theft Alarm. While armed, get alerted when your Edge device moves.
• Find My Edge. Help find a misplaced Edge by making it beep or showing its last known location on your phone.
• Grit/Flow (Mountain Bike Ride Types Only)
• Jump Metrics (Mountain Bike Ride Types Only)
• Added a new Popular data field category and generally improved the data field category order
• Updated screen creation and editing flow (applies to eBike/STEPS, Lap Summary, Segment, and Data Screen)
• Ability to swap data fields while in the timer loop on long press instead of edit only (additional tap required)
• Updated battery icon to be more visible in some places
• Incident detection setting is now active per profile instead of globally
• Added ability to hide data screens without deleting them
• Reordered settings to match the Edge 830, mainly splitting the growing number of settings into Safety & Tracking (Incident Detection, Get Assistance, Contacts, GroupTrack, Bike Alarm) and Connected Features (Phone, WiFi, Device Transfers)
• Added ability to render Hebrew text (for incoming smart notifications). This requires additional font files. Follow instructions on separate forum post.

Changes made from version 7.40 to 7.50:

• Added the option to choose the radar alert tone.
• Improved wireless performance for the ANT STEPS profile.
• Fixed issue with Shimano E8000 Di2 gear display.
• Added eBike activity logging.
• Fixed issues with the cycling dynamics page.
• Fixed issue where two locations with long, similar names would cause the device to crash.
• Fixed issues with loading very long courses.
• Added native light mode widget.

Changes made from version 7.30 to 7.40:

• Miscellaneous bug fixes

Changes made from version 7.20 to 7.30:

• Fixed a crash that could occur when riding with a cadence sensor.

Changes made from version 7.00 to 7.20:

• Improved connection to the Edge Remote.
• Fixed issue causing Connect IQ MapView to not handle inputs.
• Fixed incorrect navigation audio tones from the 7.00 update.
• Fixed a crash when sending GroupTrack messages.
• Added support for 12-speed shifting systems.
• Fixed data field issues when using a shifting system with no front derailleur.
• Fixed crash when doing the FTP test.
• Updated RTL510 and RTL500 light modes for Auto and Trail modes.
• Fixed Varia lights not activating when starting an activity.
• Fixed issue where radar would not automatically reconnect after being disconnected for more than 2 minutes.
• Fixed issue where the Edge would not automatically pair with a radar that is paired to a watch that the Edge is connected to via Extended Display Mode.
• Made several improvements to the Sensor Details UI for Vector 3 power meters.
• Added support for displaying eBike data fields on a Varia Vision.
• Fixed bug in Extended Display mode where Di2 battery would report as 255%.

Changes made from version 6.30 to 7.00:

• New Beta Feature: Galileo satellites. There is now support to use the Galileo network of satellites to assist in getting GPS fixes. With the correct GPS firmware, this option can be enabled by selecting GPS+Galileo in the GPS setting. Sync the device with Garmin Express to make sure that the new line of GPS firmware is provided to the device. Without this, the option will not be available.
• Added cycling dynamics support for 3rd party power sensors.
• Updated smart notification categories. In the phone settings, social and other smart notification categories can be enabled. This will make the Edge show notifications from other applications depending on how they are categorized by Garmin Connect Mobile. Apps like WhatsApp, GroupMe, and Twitter may show up under social and things like e-mail, calendar, and news may show up under other. These categories are off by default and must be enabled to be seen.
• Fixed an issue causing cadence and power data dropouts.
• Fixed the activity profile routing mode getting reset to Road Cycling mode.
• Added prompt to indicate when a course has more course points than are supported by the device.
• Improved Shimano STEPS response time.
• Fixed lens mode VIRB setting.
• Fixed Varia Vision connection.
• Fixed issue with transmitting front and rear gear information to the Varia Vision.
• Fixed sharp bend notifications on the Varia Vision.
• Fixed crash when using Varia Vision with workouts.
• Fixed issue with elevation back correction that could allow large dips in elevation.
• Fixed issue where the GPS data field did not match the GPS indicated by the status bar.
• Fixed issue where virtual partner features were disabled for third party GPX TRK courses.
• Added the current software version to the power on page.
• Fixed issues with device transfers.
• Completing a segment will now turn on the backlight.
• Added a minimum scale to the altimeter page so that small elevation ranges are reflected properly.
• Fixed elevation zooming issue with large courses/activities/segments (>100mi or km).
• Improved activity auto-start when the device is stationary.
• Updated radar tone to be easier to hear.
• Minor bug fixes and stability improvements.
• Minor CIQ improvements.

Changes made from version 6.00 to 6.30:

• Fixed ANT lights support for Connect IQ.

Changes made from version 5.20 to 6.00:

• New Feature: Added Connect IQ 3.0 support.
• New Feature: Added Shimano STEPS sensor support.
• New Beta Feature: Added extended display mode support. Select Menu > Extended Display Mode to allow the Edge device to act as an extended view of a supported Garmin multisport watch's data fields during a multi-stage activity such as a triathlon. Follow the on-screen Edge and multisport instructions to get started.
• Added the ability to add CIQ data fields to the map data screen.
• Improved sensor searching flow.
• Fixed issue causing unexpected u-turn sharp bend warnings.
• Fixed issues preventing device-to-device transfers from completing and made improvements to the connection flow.
• Fixed various issues with the Varia Vision.
• Fixed issue with Physio TrueUp duplicate activity detection.
• Fixed issue where VO2 max could be corrupted.
• Fixed issue that could cause the device to crash while connected to the phone.
• Fixed bike light beam angle and light mode data field text.
• Fixed the Follow a Course flow for indoor trainer mode.
• Fixed issue causing Garmin Express to offer incorrect map updates.
• Fixed issue allowing auto backlight to activate even when turned off.
• Fixed issue that could cause light settings to not be saved.
• Fixed issue causing freezes when powering off.
• Fixed issue that could prevent a radar low battery message from displaying.
• Fixed graphical glitch on the Virtual Partner page.

System requirements

1. IBM-compatible PC running Windows 2000 or later operating system and an available USB port.

---