Skip navigation links

Updates & Downloads

Voice, GPSMAP 276C/278/296/378/478 (region file only) software version 2.20

as of October 30, 2006

Download (9.16 MB)

View installation instructions and system requirements

Change History

Changes made from version 2.10 to 2.20:

Changes made from version 2.00 to 2.10:

Installation Instructions

  1. Download the self-extracting archive file for your GPS onto your hard drive.
  2. Connect your GPS to a free USB or serial port on your PC with the correct PC interface cable.
  3. Turn on your GPS. If you are using USB, ensure it shows USB as connected when the cable is plugged in. If you are using serial, ensure the Serail Data Format is set to 'Garmin Data Transfer' for the port you are using. You can find this setting on the 'Com 1' or 'Com 2' tab of the 'Setup' section of the Main Menu.
  4. Open the self-extracting archive file and follow the instructions provided by the update application. During the upload, the GPS will display 'Transferring Data...' The upload process should take 1-10 minutes to complete, depending on interface used for update. When the upload is completed, the GPS will return to normal operation.

System requirements

  1. IBM-compatible PC running Windows 2000 or later operating system and an available USB or Com 1, 2, 3, or 4 port.
  2. PC Interface Cable for your GPS unit. The PC Interface Cable may be purchased through your local Garmin distributor or ordered direct from our Online Store.