Updates & Downloads

---

Rino 7xx (WebUpdater) software version 5.10

as of September 8, 2021

Use Garmin Express to install this file.

(31.09 MB)

View system requirements

---

Change History

Changes made from version 4.80 to 5.10:

• Fix potential shutdown when downloading geocaches from Geocaching Live

Changes made from version 4.40 to 4.80:

• Added support for the inReach Remote feature (Setup->Ant Sensor->inReach Remote). Requires an inReach capable device
• Improved wireless sharing between devices
• Improved geocache proximity alarms
• Fixed issue with calculating the remaining distance when navigating to a contact
• Fixed page flow when clearing the current activity
• Fixed issue with updating the value displayed from a cadence sensor
• Fixed issue with programming a Chirp

Changes made from version 4.20 to 4.40:

• Added support for the inReach Remote feature (Setup->Ant Sensor->inReach Remote). Requires an inReach capable device
• Improved wireless sharing between devices
• Improved geocache proximity alarms
• Fixed issue with calculating the remaining distance when navigating to a contact
• Fixed page flow when clearing the current activity
• Fixed issue with updating the value displayed from a cadence sensor

Changes made from version 4.10 to 4.20:

• Fixed incorrect timestamps when viewing elevation change over time.
• Fixed potential page flow issue after saving activity.
• Fixed possible display issue with notifications.
• Fixed possible issue with navigating to contacts.
• Fixed possible issue with radio transmissions while in BaseStation mode.
• Fixed issue with scroll controls overlapping with other menu buttons in the geocache application.
• Fixed issue where changes to Find menu item order would not persist.
• Fixed issue with navigating to multicaches when geocaching.
• Fixed issue with the north arrow when rotating the map between landscape and portrait mode.
• Added support for displaying FIT activities on the map.
• Added support for the additional waypoints part of a geocache to be downloaded via geocaching live.
• Added geocache proximity alerts.
• Improved Share Wirelessly functionality.
• Improved the usability of the radio channel and code buttons.
• CIQ security update.

Changes made from version 4.00 to 4.10:

• CIQ security update

Changes made from version 3.80 to 4.00:

• Added support for G3 Marine Cartography.
• Fixed possible issue with dashboard when adding main menu pages.
• Fixed temperature spikes in track log when powering down when using a Tempe.
• Fixed issue in-which Where To -> Coordinates was not able to be added to the main menu.
• Fixed potential shutdown for area calculations when device is set to Greek.
• Fixed possible issue with smart notifications not displaying.
• Improved Connect IQ app support.

Changes made from version 3.70 to 3.80:

• Added support for Connect IQ 3.0
• Fixed issue where some maps would not draw at high zoom levels
• Fixed issue with GPS indicator on status page
• Fixed issue where some highway and freeway map labels were being cut off
• Fixed issue where some devices wouldn't wake up when in battery save mode
• Fixed issue where elevation information could be missing from marked waypoint
• Fixed issue where edit/reverse of a route would only be available after a power cycle of the device
• Fixed issue with basestation mode prompt
• Fixed issue with weather radio frequency channels
• Fixed issue with updating of code label on radio dashboard
• Fixed issue on contact tracks page
• Fixed issue with contacts in basestation mode

Changes made from version 3.40 to 3.70:

• Added support for Garmin HuntView Plus.
• Fixed possible shutdown with Chirp searching.
• Fixed possible issue transferring Geocaches from Geocache Live.
• Fixed possible issue with Share Wirelessly app.
• Fixed possible issue where EPO data would not be downloaded through GCM.
• Fixed possible issue with pairing an ANT sensor.

Changes made from version 3.30 to 3.40:

• Fixed polling location when send location is disabled
• Fixed issue preventing routes created on device from being imported via Basecamp
• Fixed issue where device would be muted after powering off while charging

Changes made from version 3.20 to 3.30:

• Added support for XERO laser locations.
• Fixed issue with the wrong distance and bearing displayed for GPI lists.
• Fixed various issues with routing.

Changes made from version 3.10 to 3.20:

• Fixed possible issue with lock on roads setting being overwritten

Changes made from version 3.00 to 3.10:

• Added support for CIQ 2.4
• Improved the sound quality of tones by removing the popping sound
• Fixed possible shutdown on the photo viewer page
• Fixed issue with Project Waypoint from the Contacts Page after entering degrees
• Fixed issue where radio dashboard would not display correct value when repeater channel is used
• Fixed issue where channel value might display incorrectly on certain values
• Fixed issue where 3-digit temperature values were cut off on the weather page
• Fixed issue where altimeter could not be zoomed on a single axis
• Fixed issue where changing profiles quickly could corrupt settings
• Fixed issue where custom dash would not change after starting/stopping navigation
• Fixed issue where the keyboard could not use lower-case letters in activity mode
• Fixed issue where settings in advanced map would be overwritten if accessed from the map page

Changes made from version 2.90 to 3.00:

• Added support for Connect-IQ version 2.3.1

Changes made from version 2.70 to 2.90:

• Fixed possible issue that would prevent depleted batteries from charging.

Changes made from version 2.50 to 2.70:

• Added support for Connect-IQ version 2.2.3.
• Added vibrate toggle button on the volume page.
• Added setting in Setup->Tones to mute the unit each time it powers up.
• Improved notifications functionality. Notes and smart notifications can now be displayed simultaneously.
• Improved volume controls so that volume can be changed while muted without unmutting.
• Fixed issue where Round-Trip Routing review page would not populate with information.
• Fixed issue where track manager would use the word 'track' instead of 'activity'.
• Fixed issue where powered off pressure trending would not work.
• Fixed issue where track portions were being saved incorrectly.
• Fixed issue where a green bar would display over the weather radar page when the automotive dashboard was on.
• Fixed issue where a geocache list deleted from geocaching.com would still show up on the device.
• Fixed issue where Round-Trip distance could not be modified.
• Fixed issue where swiping between multiple trip computer pages did not work.
• Fixed issue where selecting direct routes with more than 50 waypoints did not work.
• Fixed issue where the course line would always be drawn from the vehicle on the map.

Changes made from version 2.40 to 2.50:

• Added pressure trending while off feature. See 'Pressure Trending' in Altimeter settings.
• Fixed issue that could occur after 5 Watt radio transmissions
• Fixed various CIQ issues

Changes made from version 2.30 to 2.40:

• Added support for Connect IQ Apps and Widgets
• Added background download of geocache descriptions, hints, and logs for geocaching.com premium members
• Improved Geocache Lists experience by adding bookmark lists as well as fixing some issues
• Fixed fit file support for track logs with greater than 20,000 points
• Fixed possible issue reconnecting to speed and cadence sensors after a power cycle
• Fixed display issue after rotating on the notification page
• Fixed issue where live geocaches would overwrite geocaches loaded via .gpx file
• Fixed inconsistant data reporting for current tracks and saved tracks
• Fixed possible issues on the turn review page

Changes made from version 2.20 to 2.30:

• Improved radio data transmission in some cases
• Improved unit to unit file transfers
• Fixed issues with Connect IQ data fields
• Fixed issue with weather alert
• Fixed issue with calorie calculation when using heart rate monitor

Changes made from version 2.10 to 2.20:

• Improved radio performance

System requirements

1. IBM-compatible PC running Windows 2000 or later operating system and an available USB port.

---