Change History

GPSMAP 9022/9222 software version 37.01

as of October 2, 2024

Changes made from version 36.12 to 37.01:

• Added support on the SurroundView Page for an audible indicator which can be enabled to alert the operator as the boat gets closer to a dock or another boat. In addition, Distance Markers and Visual Bumper can now be set to Active to provide additional visual feedback for nearby obstacles.
• Added the ability to enable or disable the display of seabed areas on the Navigation and Fishing Charts. This control is only displayed when seabed area data is available. Added the ability to review additional information regarding the nature of the seabed.
• Added the ability to disable Auto Guidance+ alarms or snooze them for the duration of the power cycle. Grouped similar Auto Guidance+ alarms to reduce the frequency of these alarms.
• Added support for changing how VRM/EBL floating origins move relative to vessel movement.
• Added support for using the advanced, chart-style heading line on radar overlay.
• Added support for displaying the vessel's true-scaled outline on radar pages. Added support for configuring the radar scanner device position and offsetting returns relative to the scanner.
• Added ActiveCaptain Community Points to search results along with other search improvements.
• Added support for pairing multiple headsets for the Garmin Voice Control feature.
• Added support for the Garmin Voice Control feature to control the Garmin Boat Switch and standard NMEA 2000 digital switches.
• Added support for displaying electric engine data received from NMEA 2000 standard PGNs.
• Replaced autopilot Wind Limiter setting with Wind Gain that allows tuning response for upwind and downwind points of sail.
• Added support for calibrating the steering alignment for Force trolling motors.
• Added support for multi-zone stereo volume adjustments to maintain a proportional relationship between zone volume levels.
• Updated OneHelm to use hostname to retrieve web content.
• Added the ability to show and hide functions within the home page.
• Added a database with polar tables for common sailboats.
• Fixed an issue which caused the Level Calibration, Tank Number, and Engine Number buttons to be hidden for GFS 10 setup.
• Fixed an issue where third-party input devices connected through an Empirbus Connect 50 could have their originally assigned station overwritten in certain situations.
• Improved LakeVu and g3 Auto Guidance calculations speed when the path passes through narrow channels.
• Fixed an issue where sonar pages would always select water speed, when available, instead of the selected speed source.
• Fixed an issue where an incorrect arrival time was displayed when selecting an active route on the chart.
• Improved the accuracy of tidal stream calculations.
• Fixed an issue where the LiveScope water temperature wasn't available to display on the chartplotter.
• Fixed an issue where cameras stayed disconnected after a network error.
• Fixed an issue where HDMI input from certain third-party devices would not display properly.
• Fixed an issue where Onehelm functions on the home page in certain situations would show the incorrect icon and link to the incorrect Onehelm view.

Changes made from version 36.00 to 36.12:

• Corrected the display of negative intertidal depths and other chart depths that are displayed with an underline.
• Fixed Incompatible Built-in Map message that incorrectly appeared on the GPSMAP 9000 Series with preloaded Worldwide Shaded Relief map.

Changes made from version 35.30 to 36.00:

• Improved the image quality of relief shading charts.
• Improved the ability to recover from an interrupted Garmin Navionics+ map update.
• Added preferred sailing race start line end (port/starboard) and Start Line Bias data to Start Line Guidance page.
• Prevented engine data from the Yamaha gateway from being processed twice.
• Added support for selecting whether Power-Pole Shallow Water Anchors should stow or remain deployed when the Garmin Force trolling motor is stowed.
• Prevented gray areas from appearing outside irregular Garmin Navionics+ chart boundaries.
• Improved the presentation of multi-line text and label placement on Garmin Navionics+ charts.
• Updated the Boat Status field of the Mercury Gauge Page to show which Mercury features are active.
• Improved the user experience of setting up custom combo pages for boat builders by providing optional grid lines and allowing elements to 'snap' to the grid.
• Added the ability for boat builders to set gauge and switch backgrounds to transparent to better integrate these components into custom background images for custom combo pages.
• Added support for formatting the ActiveCaptain Card to quickly delete all files from it and restore it to an empty, blank state.
• Fixed an issue that affected the density of depth contour labels in some situations.
• Added the possibility to select the source for Total Fuel Remaining from Yamaha data or computed data from the fuel flow.
• Improved the relief shading chart presentation by preventing un-surveyed areas from obstructing high-resolution relief shading content beneath them.
• Fixed an issue that caused video from IP cameras to freeze momentarily.
• Other bug fixes and improvements.

Changes made from version 35.10 to 35.30:

• Fixed an issue preventing some radar scanners from displaying their maximum range.
• Fixed an issue where the keel offset setting would be set correctly, but display 0 when using a GSD 25 or GPSMAP 7400/7600xsv with only a 12-pin transducer.
• Fixed an issue that could cause the device to reboot when viewing certain Standard Mapping charts.
• Fixed an issue that could cause the stern guides for the Surround View Camera System to become misaligned in some situations.
• Other bug fixes and improvements.

Changes made from version 34.00 to 35.10:

• Added support for multiple Traditional, ClearVu, and SideVu sonar views in the same Combo with each displaying sonar from a specified transducer.
• Removed Traditional, ClearVu, and SideVu sonar source selection from Settings->Communications->Preferred Sources.
• Improved Sonar Setup->Source menu to show transducer names.
• Removed the dedicated Split Zoom Traditional Sonar function from the Sonar Category. Split Zoom may be enabled from any Traditional sonar window.
• Added the ability to toggle range synchronize on or off for multiple Traditional and/or ClearVu functions in the same Combo.
• Added the ability to toggle sonar scrolling synchronization on or off for Traditional and/or ClearVu functions in the same Combo.
• Added a toggle to the Frequency menu to select between low and high channels when using a dual-band CHIRP transducer.
• Added the option for boat builders to create custom combo pages to create a more branded user experience for their customers.
• Added an animated graphic indicating the built-in map is being updated and a banner indicating if an update was interrupted. Built-in map update progress is visible on the Software Information page.
• Added support for up to two radar guard zones.
• Added support for up to two radar VRM/EBLs.
• Added support for moving the origin of VRM/EBLs away from the vessel.
• Added support for outputting new NMEA0183 sentences (TLB/TLL/TTD/ZDA).
• Added new commands for Garmin Voice Control feature: Backlight Range.
• Added support for reading large capacity (exFAT formatted) cards up to 1TB via Built-In Card Reader.
• Added support for reading large capacity (exFAT formatted) cards up to 1TB via External Card Reader.
• Added support for engaging the autopilot in Low Speed Heading Hold for more responsive rudder control at low speeds.
• Added MFD support for an AX8 FLIR thermal Camera, including handling of the camera's user configurable thermal alarms.
• Added indication in the System Information page when this device is displaying the built-in map from another chartplotter on the network.
• Fixed an issue which prevented route labels from showing or hiding when the setting changed.
• Fixed an issue that prevented the tide or current station selected from the chart information menu from displaying in the tide or current review page in certain situations.
• Fixed an issue that could cause the Weather Layer setting to turn off after the device is power cycled.
• Fixed an issue that prevented 100% from being selected as a calibration point for the GFL 10.
• Fixed an issue where the user would be unnecessarily notified of entering and exiting boundary areas on power-up.
• Other improvements and bug fixes.

Changes made from version 33.41 to 34.00:

• Improved the contrast of important navigation features such as contours and hazards, and reduced the use of bright colors for less eye strain when using the chart for long periods at night.
• Streamlined access to Warning Manager, inReach messages, Smart Notifications, AIS List, and DSC List pages from the new 'All Communications' button on the bottom control bar.
• Streamlined access to user data and nearby services information from the new 'Where To' button on the bottom control bar.
• Added support for setting a home location, and then navigating to it via Auto Guidance or simple routing.
• Added support for Yamaha 24MY features.
• Added support for the autopilot Tack Speed and Gybe Speed features, which adjust the speed at which the autopilot completes tack and gybe maneuvers.
• Added support for the autopilot Auto Response feature, which monitors the sea conditions and adjust the Response setting accordingly.
• Added autopilot safety alarms for off course and disengaged events.
• Decreased Auto Guidance+ calculation time when using the latest Garmin Navionics+ content.
• Added support for the NMEA 2000 Standard MOB PGN to trigger a Man Overboard.
• Automatically store sonar logs which can be sent to Garmin via ActiveCaptain to improve Garmin Navionics+ and Garmin Navionics Vision+ Charts.
• Updated support for NMEA0183 to enable receiving new satellite constellations and to differentiate between L1/L5 satellites.
• Improved the Total Fuel Onboard calculation to only include data from fuel tanks with a valid capacity and level. Tank instances with an invalid capacity or level will now be ignored for this calculation.
• Other improvements and bug fixes.

Changes made from version 33.40 to 33.41:

• Fixed an issue when setting up Wi-Fi with certain very long passwords which could cause the device to crash.
• Resolved communications problems with certain third-party devices on the BlueNet network.

Changes made from version 33.30 to 33.40:

• Fixed an issue that could cause the device to reboot when viewing maps containing non-Latin characters.

Changes made from version 32.32 to 33.30:

• Added support for Power-Pole CHARGE Marine Power Management Station to allow users to monitor battery status, to emergency start, to select where power is directed when charging, and to transfer power between power banks. These features require purchase of a Power-Pole CHARGE unit and a C Monster Gateway through Power-Pole.
• Added support for initiating/cancelling an inReach SOS and communicating with Emergency Response from a chartplotter, via a connected inReach device.
• Added support for the user to select different accent colors that are displayed across the UI.
• Added support for an overlay bar and configuration menu to control the Active Trim feature on Mercury engines. These features require purchase of a SmartCraft Connect Gateway through Mercury.
• Added the ability to compensate for vessel heave when viewing Traditional and ClearVu sonar from a sounder that supports heave compensation. The Marine Satellite Compass MSC 10 is required to calculate heave.
• Added support for new SmartModes and presets for sailboats.
• Added support for receiving pre-planned routes from compatible third-party PC applications over NMEA 2000 and NMEA 0183.
• Added support for activating the Garmin Voice Control feature using the dedicated voice assistant button on a supported headset.
• Added new sonar gain adjustment commands for the Garmin Voice Control feature for Panoptix FrontVu, LiveScope, LiveVu, and RealVu pages.
• Added new sonar range adjustment commands for the Garmin Voice Control feature for Panoptix FrontVu, LiveVu, RealVu and LiveScope pages.
• Added new commands to the Garmin Voice Control feature to show Panoptix sonar pages.
• Improved ability to calculate longer routes with Auto Guidance+, and improved the quality of Auto Guidance+ routes in general.
• Improved performance and appearance of the chart when zooming in and out.
• Added support for calibrating Force Kraken Trolling Motor steering alignment.
• Improved presentation and usability of Preferred Source selection to allow users to make a more informed decision when choosing a preferred source, and to view which source is chosen by the automatic preferred source selection logic.
• Added support for selecting a preferred depth source when not tracking bottom.
• Added support for filtering fuel level data.
• Added overlay toolbars for viewing tide, current, and celestial information.
• Added support for displaying radar range in units of feet/meters when ranged inside 1/4 mile or equivalent distance in kilometers or nautical miles.
• Fixed issue that can cause the 'Radar Service Lost' error to show incorrectly on system powerup.
• Improved NMEA 2000 bandwidth usage on system powerup.
• Fixed an issue that caused grey boxes to show when Yamaha RPM is changed.
• Fixed an issue that prevented the Options button from working in certain situations when viewing a OneHelm page.
• Fixed an issue that caused digital data fields to not update in certain situations.
• Fixed an issue that prevented Quickdraw Contours from displaying properly on the map at certain zoom ranges.
• Fixed an issue that caused the device to lose contact with NMEA 2000 stereos in certain situations.
• Other improvements and bug fixes.